Attaching The Grip Remote Control - Sony PXW-FS7 Operating Instructions Manual

Focus adjustments for lenses with focus
switch
• When the lens focus switch is set to AF/MF or
AF, the focus is adjusted automatically and can
also be adjusted manually from the camcorder.
• When the lens focus switch is set to Full MF or
MF, the focus can only be adjusted using the
lens ring. Focus operation from the camcorder
has no effect.

Attaching the Grip Remote Control

Note
Attach/remove the grip remote control while the
camcorder is turned off.
1
Attach the arm to the grip attachment,
and tighten the screw.
2
Connect the grip remote control cable
to the REMOTE connector on the
camcorder.
Notes
• Check that the arm and grip remote control are
securely attached. They may fall off during shooting if
the screws are loose.
• Do not support the weight of the camcorder by holding
just the grip remote control.
Adjusting the position of the grip remote
control
Adjust the arm angle (1).
Loosen the two screws on the rear side of the arm
using a coin or similar object, adjust the arm
length (2), and then tighten the two screws.
Press the grip rotation button (page 11) to adjust
the angle of the grip remote control (3).
24