2.1
Introduction
Most of the connectors can be accessed from the top of the board when installed in
the chassis. If several cards have been installed or the chassis is full, the card may
need to be partially removed in order to make connections.
2.2
USB Ports
AIMB-281 supports up to 8 USB ports. The USB interface complies with USB Specifi-
cation Rev 2.0 in supporting transmission rates of up to 480 Mbps. The USB interface
can be disabled during the system BIOS setup.
AIMB-281 is equipped with two high-performance 1000 Mbps Ethernet LAN adapt-
ers; both of which are supported by all major network operating systems. The RJ-45
jacks on the rear panel offer convenient LAN connections.
AIMB-281 User Manual
14