Restore Configuration; Restore Using Ftp; Figure 309 Backup Configuration Example; Figure 310 Successful Backup Confirmation Screen - ZyXEL Communications ZyWALL 5 User Manual

Hide thumbs Also See for ZyWALL 5:

Table of Contents

Type a location for storing the configuration file or click Browse to look for one.

Choose the Xmodem protocol.

Then click Receive.

4 After a successful backup you will see the following screen. Press any key to return to the

38.4 Restore Configuration

This section shows you how to restore a previously saved configuration. Note that this

function erases the current configuration before restoring a previous back up configuration;

please do not attempt to restore unless you have a backup configuration file stored on disk.

FTP is the preferred method for restoring your current computer configuration to your

ZyWALL since FTP is faster. Please note that you must wait for the system to automatically

restart after the file transfer is complete.

Note: WARNING!

Do not interrupt the file transfer process as this may PERMANENTLY

DAMAGE YOUR ZyWALL. When the Restore Configuration process is

complete, the ZyWALL will automatically restart.

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file

upload in this chapter.

Chapter 38 Firmware and Configuration File Maintenance

** Backup Configuration completed. OK.

### Hit any key to continue.###

ZyWALL 5 User's Guide