Configuring Class Setup; Figure 151 Bandwidth Manager: Class Setup; Table 107 Bandwidth Manager: Class Setup - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 User's Guide

19.11 Configuring Class Setup

The class setup screen displays the configured bandwidth classes by individual interface.
Select an interface and click the buttons to perform the actions described next. Click "+" to
expand the class tree or click "-" to collapse the class tree. Each interface has a permanent root
class. The bandwidth budget of the root class is equal to the speed you configured on the
interface (see
sub-class layers for the root class.
To add or delete child classes on an interface, click BW MGMT, then the Class Setup tab.
The screen appears as shown (with example classes).

Figure 151 Bandwidth Manager: Class Setup

The following table describes the labels in this screen.

Table 107 Bandwidth Manager: Class Setup

LABEL
Class Setup
Interface
Bandwidth
Management
Add Sub-Class
Edit
Delete
308
Section 19.10 on page 306
DESCRIPTION
Select an interface from the drop-down list box for which you wish to set up classes.
This field displays whether bandwidth management on the interface you selected in
the field above is enabled (Active) or not (Inactive).
Click Add Sub-class to add a sub-class.
Click Edit to configure the selected class. You cannot edit the root class.
Click Delete to delete the class and all its sub-classes. You cannot delete the root
class.
to configure the speed of the interface). Configure
Chapter 19 Bandwidth Management