Activate Pattern Function; Auto Scan Setup; Figure 4-42 Pattern Setting - Honeywell CADVR-04D User Manual

Activate Pattern Function

Auto Scan Setup

Figure 4-42 Pattern Setting

In Figure 4-39, input mode value in the No. blank, and click pattern
X 3 4 6 H 3 4 6 H 3 4 6 H
button.
In Figure 4-38, click border button. The interface is shown as in
X 3 4 7 H 3 4 7 H 3 4 7 H
4-43.
Please go to
F igure 4-36
X 3 4 9 H 3 4 9 H 3 4 9 H 7 3 7 H
Then please go to Figure 4-43
X 3 5 0 H 3 5 0 H 3 5 0 H
Repeat the above procedures to set right limit.
, use direction arrows to select camera left limit
9 H 3 4 9 H
and click left limit button
X
Figure
X 3 4 8 H 3 4 8 H 3 4 8 H
69