Honeywell CADVR-04D User Manual page 60

Redundancy
Redundancy function allows you to memorize record file in several
disks. When there is file damage occurred in one disk, there is a
spare one in the other disk. You can use this function to maintain
data reliability and safety.
In the main menu, from Setting to Schedule, you can highlight
redundancy button to enable this function. See
In the main menu, from Advanced to HDD management, you can set
one or more disk(s) as redundant. You can select from the dropdown
list. See . System auto overwrites old files once hard disk
F igure 4-14
6 8 8 H
is full.
Please note only read/write disk or read-only disk can backup file
and support file search function, so you need to set at least one
read-write disk otherwise you can not record video.
Note
About redundancy setup:
If current channel is not recording, current setup gets activated
when the channel begin recording the next time.
If current channel is recording now, current setup will get activated
right away, the current file will be packet and form a file, then
system begins recording as you have just set.
After all the setups please click save button, system goes back to
the previous menu.
.
F igure 4-13
6 8 7 H
43