Faq - Honeywell CADVR-04D User Manual

9

FAQ

1 DVR cannot boot up properly.
Input power is incorrect.
Power connection is incorrect.
Power switch button is damaged.
Program upgrade is wrong.
HDD malfunction or something is wrong with HDD ribbon.
Front panel error.
Main board is damaged.
2 DVR often automatically shuts down or stops running.
Input voltage is not stable or it is too low.
HDD malfunction or something wrong with the ribbon.
Button power is not enough.
Front video signal is not stable.
Working environment is too harsh, too much dust.
Hardware malfunction.
3 System can not detect hard disk.
HDD is broken.
HDD ribbon is damaged.
HDD cable connection is loose.
Main board SATA port is broken.
There are the following possibilities:
There are the following possibilities:
There are the following possibilities:
196