Honeywell CADVR-04D User Manual page 106

UPNP
Private DDNS function shall work with special DDNS server and special
Professional Surveillance Software (CADVR-CS).
The UPNP protocol is to establish a mapping relationship between the
LAN and the WAN. Please input the router IP address in the LAN in
. Double click the UPNP item in
F igure 5-9
7 5 6 H
following interface. See
UPNP on/off ：Turn on or off the UPNP function of the device.
Status: When the UPNP is offline, it shows as "Unknown". When the
UPNP works it shows "Success"
Router LAN IP: It is the router IP in the LAN.
WAN IP: It is the router IP in the WAN.
Port Mapping list： The port mapping list here is the one to one
relationship with the router's port mapping setting.
Enable Switch : ：It shows that the function of port mapping is
enabled in this port.
List：
Service name：Defined by user.
Protocol： Protocol type
Internal port：Port that has been mapped in the router.
External port：Port that has been mapped locally.
Default: UPNP default port setting is the HTTP, TCP and UDP of the
DVR.
Add to the list: Click it to add the mapping relationship.
Delete: Click it to remove one mapping item.
F igure 5-9
7 5 7 H
F igure 5-16
.
7 5 8 H
, you can see the
89