Enter / Exit Buttons; Function Buttons - Honeywell HRDP H.264 Rev B User Manual

Appendix

Enter / Exit Buttons

Function Buttons

______________________________________________________________________________________________
100
Enter
ENTER
Exit
EXIT
Search
Focus
SEARCH
FOCUS
Backup
BACKUP
ZOOM
Zoom
Rotate
ROTATE
Preset
PRESET
Key
Iris
IRIS
Live
LIVE
Setup
Power
Input data, make selections, and
open pop-up menus.
Return to the previous mode or
menu, without saving.
Open the search menu.
In PTZ mode, press to use the Focus
function.
Use the buttons to adjust.
In live mode, press to open the backup
menu.
For Quick Backup in the search mode,
Press once, to set the start time.
Press again, to set the end time.
Press a third time, to complete Backup.
In PTZ mode, press to use PTZ Zoom
function.
Use the buttons to adjust.
Rotate through to the remaining channels
in the current display mode or rotate the
display configuration.
In PTZ mode, press to use the Preset
function.
Log out the current user. Use to prevent
accidental or unauthorized system-wide
changes.
In PTZ mode, press to use the IRIS
function.
Use the buttons to adjust.
Change the display mode. Display
switches in the following order when the
LIVE key is pressed successively: (Single
> 4 > 7 > 9 > 10 > 13 > 16 > Single > 4
> 7 > 9 ...split screen mode).
Open the setup menu.
Press and hold to shutdown or start.