Alarm Input And Output Details; Figure 3- 6. Alarm Input And Output - Honeywell CADVR-04D User Manual

Alarm Input and Output Details

In the first line,
from the left to the
right,: 1，2，3，
4，5，6，7，8，
9，10，11，12，
13，14，15，16
In the first line after
the number 1-16,
from the left to the
right:
NO1 C1，
NO2 C2，
NO3 C3，
NO4 C4,
NO5 C5 NC5
CTRL 12V
+12V
You can refer to the following sheet and
output information.
Important
Please refer to the specifications for the alarm input and output
channel amount. Do not merely count the alarm input and out
channel amount according to the ports on the rear panel.

Figure 3- 6. Alarm Input and Output

You can refer to the following sheet and
output information.
ALARM 1 to ALARM 16. The alarm becomes active in low
voltage.
The first four are four groups of normal open activation output
(on/off button)
NO5 C5 NC5 is a group of NO/NC activation output (on/off
button)
Control power output. You need to close the device power to
cancel the alarm.
It is external power input. Need the peripheral equipment to
provide +12V power (below 1A).
F igure 3-6 for alarm input and
X 2 8 8 H 2 8 8 H 2 8 8 H X
AB cable
connection
for alarm input and
F igure 3- 6
6 7 1 H
23