Table of Contents
Advertisement
Chapter 4
4 3
Manually Set Up Your Internet Connection
In this part, you can check your current internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your internet connection settings.
1. Visit
http://tplinkwifi.net
password you set for the router.
2. Go to
Basic
> Internet.
3. Follow the instructions on the page to continue the configuration. Parameters on the
figures are just used for demonstration.
Note:
Since different connection types require different cables and connection information, you can also refer to the
demonstrations to determine your connection type.
1 ) If you choose
automatically by the ISP. Dynamic IP users are usually equipped with a cable TV
or fiber cable.
2 ) If you choose
corresponding fields.
3 ) If you choose PPPoE, enter the
PPPoE users usually have DSL cable modems.
or http://192.168.0.1, and log in with your TP-Link ID or the
Dynamic
IP, the IP address and Subnet Mask are assigned
Static
IP, enter the information provided by your ISP in the
username
Set Up Internet Connection
and
password
provided by your ISP.
16
Advertisement
Table of Contents
