Sheet Printing Is Selected; Regular Printing Is Selected, But A Roll Is Loaded; Push The Release Lever Back - Canon iPF755 User Manual

Error Message > Messages regarding paper

Sheet printing is selected.

You have attempted to print a test print sheet or
other printer status information on a sheet, but
no sheet is loaded.

Regular printing is selected, but a roll is loaded.

Cause
A print job for printing
on sheets was sent
when a roll is loaded.
Paper jam

"Push the release lever back."

Cause
A paper jam oc-
curred in the
13 printer during
printing.
884
Sheet printing is selected.
>
Cause
1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop print-
ing.
2. After removing the roll, load and print on a sheet of the type and size of paper you have
specified in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
1. Push the Release Lever back and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
2. Load the paper.
3. Pull the Release Lever forward.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Corrective Action
Press ▲ or ▼ to select Load Cut Sheet, and then press the OK
button. Load the sheet, and then print.
(See "Loading and Printing on Sheets.")
To print on rolls, follow these steps.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK
button to stop printing.
2. Load a roll and try printing again.
(See "Loading and Printing on Rolls.")
Corrective Action
→P.643
→P.9
Corrective Action
→P.841
→P.845
→P.637
→P.660
→P.9
→P.6
iPF755