Paper Not Aligned With Right Guide; Cannot Detect Papr; Paper Cutting Failed - Canon iPF755 User Manual

Error Message > Messages regarding paper

Paper not aligned with right guide.

When paper was loaded, it was not aligned with the guide
on the right side.

Cannot detect papr

The paper has come out of the printer.

Paper cutting failed.

There are sheets left on the
Ejection Guide.
13
There is a foreign object by
the Output Tray, obstruct-
ing the Cutter Unit.
886
You are not using the print-
er under the recommended
environmental conditions
for the paper.
You are using paper that is
not compatible with auto-
matic cutting.
Paper not aligned with right guide.
>
Cause
Cause
Cause
1. Push the Release Lever back and remove the paper.
2. Load the paper.
3. Pull the Release Lever forward.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
1. Lift the Top Cover and remove the foreign object.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper are
met. Note that various environmental conditions are recommended for various types of
paper. For details on the recommended environmental conditions for paper, see Paper
Reference Guide."
(See Paper Reference Guide .)
1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the right.
Corrective Action
Follow these step to reload a sheet.
1. Remove the paper and press the OK button.
2. Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Follow these step to reload a sheet.
1. Push the Release Lever back and remove the paper.
2. Pull the Release Lever forward.
3. Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Corrective Action
→P.637
Corrective Action
→P.660
→P.660
→P.652
iPF755