Canon iPF755 User Manual page 762

Control Panel > Printer Menu
GL2
Set-
tings
Inter-
face
Setup
9
746
Menu Settings
>
Setting Item
Line &
AdjustFaintLines
Pen
Man-
ager
Proces- Warning
singOp-
tion
On-the-Fly
PageSizeProcess1
PageSizeProcess2
GL2 Set Print
EOP Timer
TCP/I IPv4 IPv4 Mode
P
Proto-
col
IPv4
Set-
tings
DNS
Set-
tings
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS
Set-
tings
If fine lines are printed in colors that do not match the
colors of other shapes, selecting Off may help produce
the expected results. However, lines in some colors
may appear broken.
Select On to have any GL2-related warnings dis-
played.
Selecting On will start printing jobs sooner if you are
printing only HP RTL print jobs and printing would
not start until later. However, images may be incom-
plete in some cases, so be sure to check the printing
results.
Normally, the area available for printing excludes a
margin required by the printer, and images are posi-
tioned accordingly. Selecting On in this setting elimi-
nates any misalignment of the printing position if the
image itself includes a border.
Selecting On will determine the paper size based on
the image rendering area.
Print GL2 settings information.
Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
Choose whether the printer IP address is configured
automatically or a static IP address is entered manual-
ly.
DHCP Specify the protocol used to configure the IP address
automatically.
BOOTP
RARP
IP Address Specify the printer network information when using a
static IP address.
Subnet Mask
Enter the IP address assigned to the printer, as well as
Default G/W
the network subnet mask and default gateway.
DNS Dync update Specify whether DNS server registration is updated
automatically.
Pri. DNS Specify the DNS server address.
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Specify the DNS domain name.
Name
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
DNS State- Specify whether DNS server registration is updated
Dync full automatically.
update Addr
Description, Instructions
iPF755