Manual Banding Adjustment (Adj. Quality) - Canon iPF755 User Manual

2.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
Note
• If the Tab Selection screen is not displayed, press the Menu button.
3.
Press the OK button.
The Set./Adj. Menu is displayed.
4.
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5.
Press ▲ or ▼ to select Feed Priority, and then press the OK button.
6.
Press ▲ or ▼ to select Adj. Quality, and then press the OK button.
7.
Press ▲ or ▼ to select Auto(GenuinePpr) or Auto(OtherPaper), and then press the OK button.
A test pattern is printed for adjustment.
Adjustment is now finished if you have printed on a roll or a sheet of A2 size or larger.
8.
If you are printing on sheets smaller than A2 size for Auto(OtherPaper), a confirmation message is shown on the
Display Screen requesting you to continue printing.
Press the OK button and follow the instructions on the Display Screen.

Manual Banding Adjustment (Adj. Quality)

If printed images are affected by banding in different colors, execute Adj. Quality for adjustment of the paper feed amount.
Use Manual adjustment with highly transparent media or other paper for which Auto(GenuinePpr) or Auto(OtherPaper)
cannot be used.
(See "Automatic Banding Adjustment (Adj. Quality).")
Manual adjustment requires you to enter an adjustment value after a test pattern is printed.
iPF755
Adjustments for Better Print Quality
→P.688
> Adjusting the feed amount
).
Manual Banding Adjustment (Adj. Quality)
>
7
689