Printing Interface Setting Reports - Canon iPF755 User Manual

Control Panel > Printer Menu
2.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
3.
Press the OK button.
The Set./Adj. Menu is displayed.
4.
Press ▲ or ▼ to select Test Print, and then press the OK button.
5.
Press ▲ or ▼ to select Interface Print, and then press the OK button.
Confirming Interface Print information
The following information is included in the Interface Print report.
Canon imagePROGRAF iPFxxxx Interface Print
9
Firm
Boot
MIT(DBF)
MIT(DB)
S/N
Date
EOP Timer
756 TCP/IPv4

Printing Interface Setting Reports

>
Note
• If the Tab Selection screen is not displayed, press the Menu button.
Frame Type
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dynamic Update
Use Zeroconf Function
IP Address
Printer model
Firmware Version
Boot ROM Version
MIT Database Format Version
MIT Database Version
Printer serial number
The date when the interface setup print report
was printed.
Specify the timeout period before cancellation
of print jobs that cannot be received by the
printer.
IPv4 settings values.
).
iPF755