Paper Detailed Settings - Canon iPF755 User Manual

Hide thumbs Also See for iPF755:

User manual (948 pages)

Specifications (2 pages)

Basic manual (52 pages)

Table of Contents

Printer Default

30sec. / 1min. / 3min. / 5min. /

10min. / 30min. / 60min.

Between Scans

This sets the wait time between line scans during printing.

Printer Default

1sec. / 3sec. / 5sec. / 7sec. / 9sec.

• Roll Paper Margin for Safety

Near End Margin

This sets the length of the near end margin of the roll paper.

Printer Default

• If you make the margin (white space) too small, this could disturb the print image or cause the printhead

to scour the surface of some types of media. If the printhead scours the surface of the media, adjust the

height of the printhead.

This selects the auto cut speed.

Printer Default

The settings of the printer operating panel are applied.

The paper is ejected immediately after printing.

The sheet is ejected when the specified time after printing has elapsed.

The settings of the printer operating panel are applied.

The printing continues to the next line immediately after the last line.

The printing continues to the next line after the set time.

*For the media type that has problems, such as ink smears on the page or colors that

seem uneven during borderless printing etc., increase the value for this setting.

The settings of the printer operating panel are applied.

Print at a standard size.

*Select for Media Type that has no problem when printing with a standard size mar-

This setting sets the margin about 17 mm (in the feed direction) longer than the

standard margin for the media size.

*This is for Media Type that has a strong tendency to curl, causing the printhead to

scratch the surface.

The settings of the printer operating panel are applied.

Select this setting if cutting with the Standard setting is not clean.

Select this setting when you are not experiencing problems.

Select this setting if cutting with the Standard setting is not clean.

Windows Software