Canon iPF755 User Manual page 763

Inter- TCP/I IPv6
face P
Setup
Net- NetWare
Ware
Frame Type
Print Service
AppleTalk
Ether- Auto Detect
net
Driver
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Interface Print
Return Defaults
System Sleep Timer
Setup
Buzzer
Contrast Adj.
Date & Date
Time
Time
Date Format
Language
Time Zone
Length Unit
iPF755
Setting Item
DNS DNS
Set- Dync
tings update
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
Description, Instructions
Specify whether DNS server registration is updated
State-
automatically.
less
Addr
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To ap-
ply your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to the
default values.
Specify the period before the printer enters sleep
mode.
Choose On for the buzzer to sound in case of errors.
Adjust the Display Screen contrast level.
Set the current date.
Set the current time. Available only if the Date setting
is specified.
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Choose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area, and so on.
Control Panel > Printer Menu >
Menu Settings
9
747