Canon iPF755 User Manual page 756

Control Panel > Printer Menu
Paper Details
9
740 Paper Details
Keep Paper Type
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types of
Paper.")
trol Panel) are updated when you install the printer driver from the User Software CD-ROM or if you update
paper information by using the Media Configuration Tool. (See Media Configuration Tool
Configuration Tool
Menu Settings
>
Setting Item
(The type of pa-
Scan Wait
per is displayed
Time
here.)
( *1 )
→P.740
Roll Drying-
Time
NearEnd
RollMrgn
NearEnd Sht
Mrgn
Bordless Mar-
gin
Width Detec-
tion
Return De-
faults
The types of paper indicated in the printer driver and related software (as well as on the Con-
→P.626
.)
→P.546
Description, Instructions
Specify the time to wait for the ink to dry between each scan
(after the printhead finishes moving in one direction), in con-
sideration of how quickly the ink dries. Also specify the appli-
cable area for the ink drying time. Select Entire area to apply
the ink drying time after each scan until the document is fully
printed. Select Leading edge to apply the ink drying time af-
ter each scan only in the area 110–140 mm from the leading
edge. (The applicable length varies depending on the Print
Quality setting.) Note that printing will take longer if you
specify the Scan Wait Time setting. In particular, when
Leading edge is selected, colors may be uneven in the boun-
dary between the areas with and without a drying time.
Specify the time to wait for the ink to dry for each sheet.
Specify the minimum margin at the leading edge of roll paper
to ensure better printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing quali-
ty at the leading edge and affect feeding accuracy. The printed
surface may be scratched, and ink may adhere to the leading
edge. It may also cause the Platen to become soiled.
Specify a margin at the leading edge of sheets to ensure better
printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing quali-
ty at the leading edge and affect feeding accuracy. The printed
surface may be scratched, and ink may adhere to the leading
edge.
Adjust the margin during borderless printing.
Choose Automatic to have the printer automatically detect
the paper width and configure the margin settings for border-
less printing. If margins are mistakenly created when Auto-
matic is selected, choose Fixed. In this case, the paper width
is not detected automatically, and the document is printed
without borders, using the margin settings required by the
printer.
Specify this option to print inside boundaries or in other cases
when specifying a particular starting position for printing.
(See "Printing From a Desired Starting Point.")
Paper width and skew are not detected if you select Off. If pa-
per is loaded askew, note that paper jams or Platen soiling
may occur.
Choose OK to restore Paper Details to the default values.
Print the paper settings as specified in Paper Details.
Select On when printing on a particular type of paper regular-
ly. (See "Changing the Type of Paper.")
→P.664
→P.641
or Media
→P.414
iPF755