Removal Of The Float, Needle Valve And Jets - PEUGEOT SpeedFight 3 Workshop Manual

- Remove the needle stop (2).
- Remove the spring (3).
- Remove the needle (4).
Check that the membrane is in
good condition.
The height oif the needle is factory
set and cannot be modified.
Removal of the float, needle valve and
jets
- Remove the chamber (4 screw).
- Remove the float chamber and its O-ring.
Check the condition of the float
chamber O-ring.
- Loosen the float pin clamping screw (2).
- Remove the float (3), its pin (4) and the
needle valve (5).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
3
4
FUEL SYSTEM
2
3
4
5
2
51