Service Operations; Changing The Engine Oil - PEUGEOT SpeedFight 3 Workshop Manual

SERVICE OPERATIONS

Changing the engine oil

The engine must be drained when
it is warm to allow the oil to run
easier.
Put on protective gloves.
- Place the vehicle on its central stand on flat
ground.
- Remove the engine's oil filler cap (1).
- Remove the drainage cap and its
seal (2) and allow the oil to drip into a
recipient.
- Remove the strainer cap (3) and clean the
strainer.
- Re-install the filter cap fitted with a new seal.
Tightening torque: 15 Nm.
- Insert the drain plug fitted with a new seal.
Tightening torque: 20 Nm.
- Pour the required quantity of oil
corresponding to the manufacturer's
standards into the filler hole.
Quantity: 0.7 l.
- Start the engine and let it run for a short
while.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SERVICE OPERATIONS
1
2
3
25