Removal Of The Spark Plug; Replacing The Air Filter - PEUGEOT SpeedFight 3 Workshop Manual

Removal of the spark plug

- Remove the rear storage compartment.
See: Procedure 1 page 19.
- Disconnect the suppressor (1).
- Remove the spark plug using tool
P/N 766062.
Essential precautions: When re-
installing, srew in the spark plug (a
few turns) by hand.
- Tighten the spark plug.
Tightening torque: 12 Nm.

Replacing the air filter.

- Remove the air filter cover (7 bolts) and its
seal.
- Remove the air filter (1).
- Clean inside the air filter box.
- Fit a new air filter.
- Fit the gasket (2).
- Install the air filter cover.
Check the condition of the seals
and make sure they are properly
positioned.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
2
SERVICE OPERATIONS
1
27