Removal Of The Inlet Coupling And Valves; Removal Of The Throttle Valve - PEUGEOT Jet C-Tech Workshop Manual

Removal of the inlet coupling and
valves.
- Disconnect the 2 ait supply hoses from the air
pump (1).
- Using a cutter, make a mark in the tamper
proof screw (2).
- Remove the 2 bolts.
- Remove the inlet coupling.
- Remove the reed valves and its gasket of
composite materials.

Removal of the throttle valve.

- Take out the throttle control cable (1) by
compressing the spring using the throttle
valve (2).
- Dismantle the valve equipped with its needle,
spring and carburettor chamber cap.
- Dismantle the needle (3) by pushing it out in
order to remove the clips (4).
The height oif the needle is factory set and cannot be modified.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
2
1
PETROL CIRCUITS
2
4
3
21