Reassembly - PEUGEOT SpeedFight 3 Workshop Manual

- Remove the wheel spindle nut and washer (2).
- Remove the rear wheel.
- Remove the brake linings (3).
- Remove the adjusting nut, the barrel (4) and
the brake control cable (5).
- Remove the brake arm (6), the brake
cam (7) and the spring.

Reassembly

Lubricate the brake cam spindle and fit it
into the casing.
- Fit the brake arm (6) by aligning it with the brake
cam axis (7).
Tightening torque: 8 Nm.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
7
6
4 5
SERVICE OPERATIONS
2
3
7
6
37