PEUGEOT SpeedFight 3 Workshop Manual page 42

STEERING/FORK
- Fit the front mudguard.
- Fit the speedometer drive gear assembly to
the wheel drive pins.
- Fit the wheel, matching the speedometer
drive gear assembly to the pin (A) on the fork
stanchion.
- Fit the wheel spindle and tighten.
When re-installing, use a new nut.
Tightening torque: 65 Nm.
- Tighten the spindle clamping screw (1).
Tightening torque: 10 Nm.
- Refit the other items in the reverse order to
disassembly.
40
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
1