Steering/Fork; Changing The Front Fork Seals - PEUGEOT SpeedFight 3 Workshop Manual

STEERING/FORK

Changing the front fork seals

- Suspend or immobilize the machine
securely.
- Remove the front brake caliper from the fork
tube (2 screw).
- Loosen the wheel spindle clamping screw (1).
- Remove the wheel spindle (2).
- Remove the front wheel.
- Remove the front mudguard (4 screw).
- Remove the screws fastening the fork
stanchions (3).
- Remove the fork stanchions.
- Carefully remove the lip seals using a
screwdriver (4).
- Install new lightly lubricated lip seals.
- Fit the fork staunchions.
Tightening torque: 25 Nm.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
2
3
4
STEERING/FORK
1
39