SERVICE OPERATIONS
Empty the oil from the engine
The engine must be drained when it is
warm to allow the oil to run easier.
Wear gloves in order not to get burnt.
- Place the vehicle on its central stand on flat
ground.
- Remove the engine's oil filler cap (1).
Remove the drainage cap and its seal (2)
and allow the oil to drip into a recipient.
Tightening torque:40 Nm.
Replace the copper seal every time you
change oil.
- Remove the strainer cap (3) and clean the
strainer.
Tightening torque:15 Nm.
Every time oil is changed, the filter (4)
must
be
changed (5).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
cleaned
and
the
1
O-ring
3
SERVICE OPERATIONS
2
4
5
31