Using The Remote Control; Power / Recharging / Start/Stop / Suction - Samsung POWERbot SR20K9350W Series User Manual

Using the remote control

1 power / recharging / Start/Stop
Power
Recharging
Start/Stop
2 Suction power
Max mode
Normal mode
Quiet mode
3 additional function
Sound
Smart control
✻ ✻ The previously selected setting will not change even if the emergency switch is turned off and then on.
inserting batteries
Open the battery cover by lifting it up
while pressing the locking tab and
insert the batteries as shown in the
illustration. Then, close the cover until
it clicks into place.
Turn POWERbot's power on/off
Select to recharge POWERbot at the docking station
automatically
Select to start or stop cleaning process
Select to clean with the strongest suction power
Select to clean with moderate suction power
Select to clean with lower operation noise
Each time you press this button, Sound Effects → Mute is
selected in this sequence.
Select to turn on or off the smart control
✻ ✻ Press [Sound] button for 3 seconds..
✻ ✻ Wi-Fi connection should be done to control the
POWERbot using SmartThings App.
ENGLISH-16