System Configuration; Viewing Time Reports - 3M XT-1 Operating Instructions Manual

Appendix: Timer Module

System Configuration

As mentioned previously, the system configuration field is used to apply one of a
few provided drive-thru templates most closely matching each store's requirements.
The following are modified when a configuration is selected.
•

Viewing Time Reports

The main timer screen shows you the time reports configured for your system.
Following is a definition of the items on the above screen:
>JUN/16/2010<
< Breakfast >
<Day Part>
Lane 1
06:00 to 10:30
November 2011 - Revision 1.8
Page 64 of 65
Custom Names
• Report Groups
• Timer Goals
• Remote Display Settings
>Jun/16/2010<|< Breakfast >|<Day Part>h
Lane 1 |06:00 to 10:30|Total=117
Except = 0015|AVG.|GOAL|OVER|Attained
OrderPoint1 |1:25|1:00|0031|079.05% i
The date selected for the report data.
The timer system shows, at a maximum,
the last 7 days of data available.
The time period report sub-type. The custom names
that appear are user-specified during configuration.
The time period report type. This can be Full
Day, Day Part, Shift, Hour, or OneEvent
The report group name. The report groups
names are user-specified. A typical use for group
names is to separate one drive through lane
from another (e.g., "Lane 1" and "Lane 2).
The time slot for the day part you are
currently viewing (in this case Breakfast).
3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions