Maintenance; Headset; Replacing The Ear And Headband Pads; Battery Charger - 3M XT-1 Operating Instructions Manual

Headset

Replacing the Ear and Headband Pads

To replace the ear pad, remove the worn/damaged ear pad from the ear cup and replace it with a new pad.
To replace the headband pad, remove the worn/damaged pad by peeling it from the back of the battery
housing. Remove protective backing from new pad and press it into place on the back of the battery housing.

Battery Charger

Location

The battery charger should be placed on a flat surface such as a desktop or table in a clean, dry environment.

Cleaning the Contacts

If the indicators fail to light during charger operation, clean the contacts using a water-moistened cotton swab.
3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions

Maintenance

Headband Pad
Ear Pad
Figure 6
Maintenance
November 2011 - Revision 1.8
Page 33 of 65