Page 1
Instructions for G5 Headset Controls and Battery Charging ....2–3 Instructions for XT-1 Headset Controls and Battery Charging ....4 Order Taking Modes .
Page 2
Instructions for G5 Headset Controls and Battery Charging Headset Controls Adjustment Slide Carrier Battery Latch ID Tag Volume Up Volume Down Touch Zone Lane 2 Tap to Release Headset from Order Taking Touch Zone Lane 1 Indicator LED (see G5 Headset Indicator...
Page 3
Instructions for G5 Headset Controls and Battery Charging (continued) Removing Batteries Check if the pod of the headset is disabled from the carrier by sliding the padlock toggle to unlock • Use your finger to gentle press up on the battery latch. This will release the battery as shown in Image 1.
Page 4
Order Taking Modes See your Manager to confirm which Order Taking Mode your headset is using. Order Taking Mode Mode Description Manual Listen • Headset beeps when vehicle is detected • Tap Talk button to turn on Customer Order Point microphone and hear the customer (ML) •...
Page 5
Order Taking Modes (continued) Change Order Taking Mode There are seven order taking modes, which offer different combinations of speaking, listening, automatic standby, vehicle detector, and order point modes. Perform the following procedure to switch to a different order taker mode: 1.
Page 6
Change Basic Volume Settings Note: All volume settings should be adjusted during normal or peak business hours. Adjusting them during slow times will likely produce volume settings that are too low. Note: Inbound and outbound are always defined from the perspective of the headset. Inbound Microphone Volume Changing the inbound microphone volume affects the sound volume coming from the customer order point microphone.
Page 7
1. Enter the base station configuration mode. 2. Select 04 Registration > 1 Add New Headsets. 3. Power on the headset when prompted. Or in the case of a G5 headset, insert he battery to automatically power on the headset.
Page 8
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If the 3M intercom product does not conform to this warranty, the sole and exclusive remedy is, at 3M’s option, repair or replacement of the 3M product or refund of the purchase price.
Need help?
Do you have a question about the G5 and is the answer not in the manual?
Questions and answers