Replace The Battery - 3M XT-1 Operating Instructions Manual

Replace the Battery

It is important to have fully charged batteries in the headset. When a battery is low, the
system plays a "change battery now" message in the headset every 15 seconds.
Note:
When installing a battery, make sure it is fully charged. It is important to remember that an unused 3M™
Wireless Communication System Model XT-1 battery loses five percent of its charge per week. If a battery has
not been used for several weeks, make sure to charge it prior to use.
1. Slide and hold the battery release.
2. Remove the discharged battery from the battery housing.
Insert a fully charged battery in the housing with the notch facing the battery
3.
release. Make sure the battery is fully inserted (battery release clicks).
3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
Figure 3
Operation
November 2011 - Revision 1.8
Page 27 of 65