Outbound Talk Volume; Vehicle Alert Volume; Outbound Greeter Message Volume; Change The Monitor Volume - 3M XT-1 Operating Instructions Manual

Outbound Talk Volume

Changing the outbound talk volume affects the volume of the speaker at the customer order point.
Note:
To avoid feedback, set the outbound talk volume as low as possible.
To change the outbound talk volume:
• Enter the configuration mode, see page 5.
Select a new value for 01 Drivethru Volume > Outbound Talk Volume.
•
The range is 0 (silent) to 20 (maximum).

Vehicle Alert Volume

Changing the vehicle alert volume affects the volume of the vehicle alert signal on the headsets.
To change the vehicle alert volume:
• Enter the configuration mode, see page 5.
Select a new value for 01 Drivethru Volume > Vehicle Alert Volume.
•
The range is 0 (silent) to 20 (maximum).

Outbound Greeter Message Volume

Changing the outbound greeter message volume affects the sound volume of the custom greeting
messages and the system internal greetings ("Store Closed" and "Pull Forward").
To turn up or down the greeter message volume:
• Enter the configuration mode, see page 5.
Select a new value for 01 Drivethru Volume > Greeter Message Volume.
•
The range is 0 (silent) to 20 (maximum).

Change the Monitor Volume

The monitor is an additional speaker that can be used to monitor drive thru communication
without a headset, typically in the kitchen. If the monitor has a volume control built into it,
you can use it to control the overall volume level of the speaker. To be more specific about
which elements you want to control, follow the instructions in the following sections.
3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
Configuration
November 2011 - Revision 1.8
Page 9 of 65