Split Lane; Cross Lane; Change Volume Mode - 3M XT-1 Operating Instructions Manual

Operation

Split Lane

Split Lane mode is the preferred mode for heavy volume because it essentially
separates the communications between the two base stations.
•
•
•
Notes:
A headset becomes a "lane 1" or "lane 2" headset by momentarily pressing and releasing the
T1 or T2 button.
You can configure the base stations to permit paging to be heard by both lanes. Refer to
configuration section of the manager's guide.

Cross Lane

Cross Lane mode is the preferred mode for lighter volume or whenever one order taker
needs to answer both order points: essentially, the two order points cross over.
•
•
•

Change Volume Mode

If you have night volume reduction in use on your system, the volume change happens
automatically at the set "Day" and "Night" times. However, you can change the
volume mode manually without changing the day or night time setting.
Perform the following procedure to change between night and day or day and night volume:
1. Press
2. Press Enter.
3. Use the arrows to select between DAY and NIGHT.
4. Press Enter to implement the change or press Mode to abandon
November 2011 - Revision 1.8
Page 32 of 65
Operators will only hear a signal from the order point last used: single repeating
beep from order point 1 or a double repeating beep from order point 2.
The headset buttons T1 and T2 communicate only with order point 1 and order point 2, respectively.
For paging, pressing the page button on a lane 1 headset is only heard by other lane 1 headsets.
Likewise pressing the page button on a lane 2 headset is only heard by other lane 2 headset.
Operators will hear signals from both order points: single repeating beep from
order point 1 or a double repeating beep beep from order point 2.
The headset buttons T1 and T2 communicate only with order point 1 and order point 2, respectively.
For paging, pressing the page button is heard by all headsets.
6
until the Volume selection is highlighted.
the change and leave the previous setting in effect.
3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions