Assembly And Disassembly; Attaching/Removing The Battery - HYT TC-518 OBR Owner's Manual

On-site business radio
Table of Contents

Advertisement

Assembly and Disassembly

Attaching/Removing the Battery

Attaching the Battery
1. Slightly press the belt clip, and insert the tab at the top of the battery into
the slots at the top of the radio's body, as shown in figure 1.
Note: Make sure the battery tab is fully inserted into the radio's
slot.
2. Slightly press the bottom of the battery until a click is heard. By then, the
battery latch locks with the main unit and assembly is finished. See figure 2
below.
Note: If the battery is loose or unsecured, please take it down and
attach it again.
Figure 1
Removing the Battery
1. Please turn off the radio first. Then hold the top of radio unit and press the
belt clip to make its bottom up. Lift the battery latch, as shown in figure 3.
2. When the bottom of battery is lifted, release the battery latch and remove
the battery from the radio's body, as shown in figure 4.
Note: To avoid serious abrasion between the top tap and the slot,
do not tilt the battery to a large angle.
Figure 3
10
Figure 2
Figure 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents