Troubleshooting - HYT TC-518 OBR Owner's Manual

On-site business radio
Table of Contents

Advertisement

Troubleshooting

Symptom
Cannot power on the radio.
T h e o p e r a t i n g t i m e i s
noticeably shorter than normal
performance, even though the
battery is properly charged.
Cannot talk to or hear group
members.
Hear non-group members.
No voice or low voice while
transmitting.
Noises always on.
● The battery has run out. Please recharge
the battery or replace it with a new one.
● The battery is not properly installed.
Please remove the battery and attach it
again.
● The battery has worn out, and it is time
to buy a new battery.
● The battery is not fully charged. Be sure
to remove the battery from charger after
the charger LED glows green.
● Make sure you are on the same channel
w i t h y o u r g r o u p m e m b e r s . C h e c k
whether the Channel Lock feature is
enabled. And if so, rotating the Channel
Selector Knob won't change the current
channel.
● Make sure radios have the same channel
and the same CTCSS/CDCSS settings.
● M a k e s u r e y o u a r e w i t h i n t h e i r
communication range.
● The CTCSS/CDCSS settings should be
changed for all radios in your group via
programming cable and CPS software.
● Make sure the volume control knob is
positioned properly.
● Contact your retailer for RMA (Return
Merchandise Authorization) and warranty
information.
● Group members are too far away to
receive their call. Please go within the
communication range and re-power on
the radio.
21
Solution

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents