Assembly and Disassembly
Attaching/Removing the Antenna
Attaching the Antenna
1. Align the threaded end of the antenna with the radio's antenna connector.
2. Turn the antenna clockwise until it is screwed down, shown as figure 5.
Removing the Antenna
Turn the antenna counter-clockwise until it is loosened and screwed out.
Figure 5
Figure 6
Attaching/Removing the Belt Clip
Attaching the Belt Clip
Loosen the screws of belt clip from the main unit; fasten the belt clip to the
main unit (make sure the screw holes of belt clip are aligned with those of
aluminum chassis); and clockwise screw down the belt clip. See figure 6
above.
Removing the Belt Clip
Turn the screwdriver counter-clockwise to loosen the screw. Please refer to the
operations for attaching the belt clip.
Note: Please be careful to avoid missing of screws.
Attaching/Removing the Earpiece or Microphone
Attaching the Earpiece/Microphone
1. Open (not remove) the accessory jack cover.
2. Plug the audio accessory firmly into the accessory jack, and then secure
the screw, shown as figure 7.
11