Disassembly and Assembly
Disassembling the Aluminum Chassis
① Remove the volume control knob.
② Remove the channel selector knob.
③ Unscrew the nut for the volume control knob.
④ Unscrew the nut for the channel selector knob.
⑤ Unfasten the two screws at the bottom of the radio.
⑥ Lift the bottom of the aluminum chassis, pull the aluminum chassis backwards and take it out.
⑦ Remove the rear cover.
⑧ The disassembled parts are shown as figure 3.
1
3
5
5
Figure 1
6
Figure 2
45
POWER446 Service Manual
2
4
7