Antenna Information; Assembly And Disassembly - HYT TC-518 Owner's Manual

4. Power up the charger and place the battery back into the charger pocket. If the LED
indicator continues to flash red, replace the battery.
Note:
When the battery charger detects the proper battery conditions, rapid charging begins
automatically (steady red LED).
If the battery temperature is above 45℃, the charger will report the fault by flashing red
LED rapidly (0.2s on/0.2s off), and will not charge until the battery temperature is below
45℃, with red LED solidly glows (Ni-MH battery only).

Antenna Information

Stubby antennas are ideal for communication within limited range. Fine and long
antennas optimizes communication coverage, ideal when the radio is worn on the belt
because they are flexible and soft.
Rainy days or forest locations may narrow your communication range, please prepare
in advance to avoid potential inconvenience.

Assembly and Disassembly

Attaching the Battery
Hold the battery and make it close to the top of aluminum chassis, see figure 1. (Note: insert the
tab on the top of battery into the top of battery slot.)
Lightly press the bottom of the battery until a click is heard. By then, the battery latch locks with
Figure 1
11
TC-518 Owner's Manual