Kenmore 29" Installation Instructions Manual page 5

iNSTALLATiON REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Tools needed for oil installations:
Tools needed for gas installations:
Flat-blade screwdriver
#2 Phillips screwdriver
8" or 10" pipe wrench
8" or 10" adjustable wrench
(for gas connections)
1/4" nut driver or socket
wrench (recommended)
Tin snips (new vent
installations)
Tape measure Vent clamps
Level Pliers
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
Caulking gun and compound (for
installing new exhaust vent)
Pipe-joint compound
resistant to LP gas
Ports supplied:
Leveling legs (4)
Parts package is located in dryer drum. Check that all parts
are included.
Ports needed:
Check local codes. Check existing electrical supply and venting.
See "Electrical Requirements" and "Venting Requirements" before
purchasing parts.
Mobile home installations require metal exhaust system hardware. For
more information_ see "Assistance or Service" section in your "Use and
Care Guide",
Optional Equipment: (Not supplied with dryer)
Refer to your "Use and Care Guide" for information about accessories
available for your dryer.
Utility knife