a
b
Check that protective tube is
correctly positioned:
a = 20 mm
b = 33 mm
Hook the brake spring to the
lever.
1
Use the assembly tool
1117 890 0900 to attach the
brake spring (1) to the anchor pin.
– Fit cover over the chain brake.
12
– Fit the inner side plate -
– Install the clutch drum/chain
sprocket -
see
4.1.
– Fit the cutting attachment and
chain sprocket cover -
4.5
Chain Brake (036 QS)
4.5.1
Removing
see
4.1.
Troubleshooting chart - see
"Standard Repairs, Trouble-
shooting" handbook.
– Remove the chain sprocket cover
and cutting attachment -
see
4.1.
– Remove clutch drum/chain
sprocket -
3
Remove mounting screw (1) from
inner side plate (2) and lift side
plate away.
Remove mounting screws (3)
from cover (4) and lift the cover
away.
– Engage the chain brake by
pushing the hand guard away
from the front handle.
see
4.1.
see
4.1.
4
3
1
2
3
034, 036, 036 QS