Step Two: Installing Dial-Up Tcp/Ip Support - US Robotics Courier V.Everything Getting Started Manual

Step Two: Installing Dial-Up TCP/IP Support

1
Click Start | Settings | Control Panel.
2
On the Control Panel, double-click on the
Network icon to display the following window:
Determine if the TCP/IP Dial-Up Adapter is installed:
IF TCP/IP ->
Dial-Up
Adapter
Is not listed
Is listed
Windows 95
Do this
Click Add... | Protocol | Microsoft | TCP/IP
| OK.
Insert your Windows 95 Setup diskette or CD-
ROM when you are prompted, and
Windows 95 installs TCP/IP protocol
support.
Read the section "Customize the TCP/IP
Settings"
4-9