Lucent Technologies Host-Based Controller Modem AT Data Addendum page 65

Data Addendum
June 15, 1998
AT Commands for Homologation Testing and Debugging (continued)
Homologation Parameters
Par #
1 Pulse dial make time
2 Pulse dial break time
3 Pulse dial digit pattern
4 DTMF high tone level in dB with implied minus sign
5 Min. DTMF dial speed in ms
6 Max. DTMF dial speed in ms
7 Call progress detection threshold in dB with implied minus
sign
8 Dial tone delay, i.e., waiting time before dial tone
detection begins in multiples of 10 ms
9 Dial tone hole time in ms
a Delay before resetting ring count to 0, in multiples of 100
ms
b Min. ring count for auto-answer
c Max. ring count for auto-answer
d Min. ring signal period =
1000/(0.833 x Max. ring frequency)
e Max. ring signal period =
1000/(0.833 x Min. ring frequency)
f Min. ring cadence on time, in multiples of 10 ms
10 Min ring cadence off time, in multiple of 20 ms
11 Min. busy cadence on time, in multiples of 10 ms
12 Max. busy cadence on time, in multiples of 10 ms
13 Number of busy cycles required to detect busy condition
14 Min. busy cadence off time, in multiples of 10 ms
15 Max. busy cadence off time, in multiples of 10 ms
16 Continuous # unavailable detection flag
17 Answer tone validation time in multiples of 10 ms
18 Blacklisting/delayed flag
Version 1.0
Table 13. The Homologation Parameters
Parameter Description
Lucent Technologies Inc.
Host-Based Controller Modem
AT Command Set
Range
0—255
0—255
1 = normal, 2 = Sweden,
3 = Norway
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255
0—255; If 0, use the standard
busy detection algorithm;
otherwise, use the country
specific values for cadence
0—255; If 0, use the standard
busy detection algorithm;
otherwise, use the country
specific values for cadence
0—255
0—255; If 0, use the standard
busy detection algorithm;
otherwise, use the country
specific values for cadence
0—255; If 0, use the standard
busy detection algorithm;
otherwise, use the country
specific values for cadence
0 = disabled, 1 = enabled
0—255
0 = disabled, 1 = enabled
Reference
ATD
ATD
ATD
ATD
S11
S11
S0
S0
ATD
65