At Fax Command Set (Class 1 Fax) - Lucent Technologies Host-Based Controller Modem AT Data Addendum

Host-Based Controller Modem
AT Command Set
AT FAX Command Set
The Lucent Technologies modem supports FAX commands conforming to EIA standard 578. These commands
are given here with short descriptions; complete explanations are given in the standard, available from the
Electronic Industries Association.
Command
+FCLASS?
+FCLASS = ?
+FCLASS = n
+FTS = <n>
+FRS = <n>
+FTM = <m>
+FRM = <m>
+FTH = <m>
+FRH = <m>
+FTM = ?
+FRM = ?
+FTH = ?
+FRH = ?
+FMI?
+FMM?
+FMR?
+FPR = <n>
+FPR = ?
+FPR?
+FAA = <n>
+FAA = ?
+FAA?
36
(Class 1 FAX)
Table 5. The AT FAX Command Set Summary
Service class indication
Service class capabilities
Service class selection
Transmission silence
Receive silence
Transmit FAX data with <m> carrier
Receive FAX data with <m> carrier
Transmit HDLC data with <m> carrier
Receive HDLC data with <m> carrier
Transmit FAX modulation
Receive FAX modulation
Transmit HDLC Data modulation
Receive HDLC Data modulation
Manufacturer Identification
Product Identification
Version/Revision Information
Set DTE-DCE Fax port rate
Reports all fax port rate that DCE supports
Reports the current fax port rate of DTE-DCE
Set DCE Adaptive answer mode
Display valid adaptive answer values that DCE supports
Display current set value of adaptive answer mode
Version 1.0
Description
Lucent Technologies Inc.
Data Addendum
June 15, 1998