Assembly - Pro-Form Crosswalk 425 PFTL39707.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly
requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the
packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with
high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or to the
3/4" Tek Screw (58)–8
shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top
of the walking belt, wipe it off with a soft cloth and mild, non-abrasive cleaner.
Assembly requires the included hex keys
mallet , and adjustable wrench
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST on page 23. The number after the parentheses shows the quan-
tity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts
to be assembled. To avoid damaging plastic parts, do not use power tools for assembly.
1/4" Star
Washer (95)–4
5/16" Star
Washer (5)–4
Washer (101)–4
Extension Leg
Nut (46)–2
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side as shown. Partially
fold the Frame (86) so the treadmill is more sta-
ble. Do not fully fold the Frame until the
treadmill is completely assembled.
Insert an Extension Leg (63) into the base of the
right Upright (69) as shown. Hold an Extension
Leg Nut (46) in the bottom of the Extension Leg,
and thread a 2 1/4" Bolt (93) with a 5/16" Star
Washer (101) into the top of the Extension Leg.
Next, thread a 2 3/4" Bolt (100) with a 5/16" Star
Washer (101) into the bottom of the Extension
leg. Firmly tighten the Bolts.
Handrail Bolt (37)–4
3/4" Screw (2)–8
1" Tek Screw (39)–4
1/4" Washer
3/8" Star
(38)–4
Nut (13)–2
Pulse Bar Star
3/8" Star Washer (65)–4
Washer (83)–4
and your own Phillips screwdriver
.
Handrail
Bolt (37)–4
3 1/2" Bolt (96)–4
1
93
101
86
Wheel Bolt (64)–2
6
1/2" Screw (119)–1
Wheel Bolt (64)–2
2 1/4" Bolt (93)–2
2 3/4" Bolt (100)–2
69
101
46
63
100
Silver Ground
Screw (G)–1
, rubber