The Right Upright (69) With Two 1" Tek Screws - Pro-Form Crosswalk 425 PFTL39707.0 User Manual

2. Attach two Round Base Pads (57) to the base of

the right Upright (69) with two 1" Tek Screws

(39).
Attach a Wheel (66) to the base of the right
Upright (69) with a Wheel Bolt (64) and a Nut
(13) as shown. Do not overtighten the Wheel
Bolt; the Wheel should turn freely.
3. With the help of a second person, carefully tip
the treadmill onto its right side. Do not fully fold
the Frame (86) until the treadmill is com-
pletely assembled.
Insert the other Extension Leg (63) into the base
of the left Upright (69). Hold an Extension Leg
Nut (46) in the bottom of the Extension Leg, and
thread a 2 1/4" Bolt (93) with a 5/16" Star
Washer (101) into the top of the Extension Leg.
Next, thread a 2 3/4" Bolt (100) with a 5/16" Star
Washer (101) into the bottom of the Extension
Leg. Firmly tighten the Bolts.
4. Attach two Round Base Pads (57) to the base of
the left Upright (69) with two 1" Tek Screws (39).
Attach a Wheel (66) to the base of the left
Upright (69) with a Wheel Bolt (64) and a Nut
(13) as shown. Do not overtighten the Wheel
Bolt; the Wheel should turn freely.
2
69
57
3
101
100
4
66
64
13
39
57
7
64
66
13
39
57
39
69
46
63
86
69
57
39
93
101