Pro-Form Crosswalk 425 PFTL39707.0 User Manual page 14

THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console. The in-
formation mode also allows you to turn on and turn off
the display demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, wait until you
hear a tone, and then release the Stop button. The fol-
lowing information will then be shown:
The upper display will show the
total number of hours that the
treadmill has been used.
The lower left display will show
the total number of miles (or
kilometers) that the walking belt
has moved.
An "E" (for English) or an "M"
(for metric) will appear in the
lower right display. Press the
Speed increase button to
change the unit of measure-
ment, if desired.
Note: The console features a
display demo mode, designed
to be used if the treadmill is
displayed in a store. While the
demo mode is turned on, the
console will function normally
when you plug in the power cord, switch the circuit
breaker to the reset position, and insert the key into
the console. However, when you remove the key, the
displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a "d" will ap-
pear in the lower right display while the information
mode is selected. To turn on or turn off the demo mode,
press the speed decrease button.
To exit the information mode, remove the key from the
console.
14