Table of Contents
Advertisement
c. Additional Error Recovery Parameters (Page Code = 21)
•
Number of retries during seek error (See Table 4.5)
Table 4.5
Item
Type of Error
1
Seek Error
2
Data Read Error
Remark:
The number of retries is calculated single logical sector processing units, except in the
following cases.
•
In the data area, the number of retries is calculated as individual retries. However, if a
read is detected in the ID area while reading is being retried in the data area, retry
processing is continued with the number of retries for the data area being calculated.
•
In processing of data blocks for which alternate sector processing is completed, the
number of retries on the defective sectors is calculated separately from the number of
retries on the alternate sectors.
Disk Drive Errors and Number of Retries
Number of Tries Specification [Default value]
Number of Retries during a Seek Error
Number of Retries during Read or
Number of Retries during Verify
C141-E039-01EN
[15]
[34]
4 - 31
Advertisement
Table of Contents
