Table of Contents
Advertisement
•
Starting Boundary
This field is enabled by the MODE SENSE command. This field is enabled when ND=1
and the top address of the zone (+1) indicated by the active notch shows the
logical/physical block format.
•
Ending Boundary
This field is valid in the MODE SENSE command. It is valid when ND=1, and the final
address of the zone (+1) shown by the active notch is indicated in the physical/logical
block format.
•
Page Notch (Not Supported)
This is a bit map which shows whether or not other mode pages are being changed if the
device is notched. This device does not support this function. If it is specified, the IDD
disregards this value.
The IDD does not support the Standby condition. The "Standby" bit specification and the
"Standby Condition Timer" specification are disregarded.
C141-E039-01EN
3 - 55
Advertisement
Table of Contents
