Table of Contents
Advertisement
Table 3.3
CDB Byte 1
FmtData CmpLst
Defect list
format
1
0
1 0 0
1 0 1
(Notes
1, 3)
1
1
1 0 0
1 0 1
1
1
1 0 0
1 0 1
Note 1)
ddd:
0,0,0= D List in the block address format.
1,0,0= D List in the byte distance from the index format.
1,0,1= D List in the physical sector address format.
Note 2)
The D List is not transferred from the INIT.
Note 3)
If the data block length is changed and the disk media is initialized, the INIT cannot
specify a combination defect processing method.
Note 4)
When this combination of defect processing methods is specified, the IDD performs
verification of the data blocks after initialization and creates the C List.
combination defect processing methods, the INIT can clearly specify whether the
verification operation is prohibited or permitted by the DCRT flag of the Format
parameter.
FORMAT UNIT command Defect Processing (2/2)
Header
Defect
FOV
DPRY
List
Length
1
1
>0
0
0
>0
1
0
1
1
>0
C141-E039-01EN
Defect Processing Method
Alternate block allocation is
performed for defects registered in
the previously existing G List and
the defects described in the D List
transferred from the INIT.
The P List is saved, but it is not
used in defect processing.
The D List is added to the
previously existing G List
Alternate block allocation is
performed for defects described in
the D List transferred from the
INIT.
The previously existing G List is
erased and it is not used in defect
processing.
The D List is registered as the
new G list.
Alternate block allocation is
performed for defects registered in
the P List and the defects
described in the D List transferred
from the INIT.
The P List is saved, but it is not
used in defect processing.
The previously existing G List is
erased and it is not used in defect
processing.
The D List is added to the
previously existing G List.
In other
3 - 103
Advertisement
Table of Contents
